Fertiliser Capacity 17 tonnes

Lime Sand Capacity 19.5 tonnes

ISOBUS compatible, the Apollo II system connects to any ISOBUS compatible tractor. This enables the operator to manage setup, calibration and rate control from the Virtual Terminal Display.  VRT compatible.

Load Cells give the Spreader ultimate accuracy and allow for continuous calibration of product.

The front end, entire rear section and bottom one third of the bin are made from stainless steel. All nuts, bolts, pipes and hydraulic fittings are also stainless steel.

The hopper mesh is also made from stainless steel making it longer lasting when using corrosive fertiliser products.

36m Fertiliser Discs are easily interchangeable with the Lime, Manure and Gypsum Discs to maximise accuracy for different products.  Spreads Urea to 36m – Independently certified and farmer proven.

Easily Manageable Interchangeable Discs allow for a quick and simple change between applications.  Maximising accuracy for different products.  Spreads Lime & Gypsum up to 16m.

AgriSpread fit drawbar suspension to all models to help minimise the effect of inertia energy transmission and to prove a smoother ride. To enhance the spread accuracy further, all tandem axle models have the addition of axle suspension to absorb impacts, providing a smoother ride, and better distribution at higher operating speeds.

3m wheel centres enable the spreader to fit with most CTF systems.

LED Tail lights give indicator safety to the operator and others when transporting or moving machine.

Standard with each spreader, the high spec calibration kit includes; 13 test trays with dividing inserts, test tubes, bulk density meter, hardness tester, granular sieve, and a windometer. This kit has been designed to assist with the correct set-up and testing of the rate, flow and distribution pattern of spread products.

The AgriSpread section control spreader use two independent, hydraulically
controlled conveyors via GPS, to feed material onto independently controlled
hydraulic spinners to give the applicator the most precise distribution of product
where required. The twin conveyor system give the spreader the ability to change the rate on either side of the machine in relation to the spread width/rate required. In conjunction to this, the spinner speed automatically changes speed to match the width required based on the amount of sections turned off.

AgriSpread’s hydraulic folding curtains make it possible to spread low density product into difficult conditions without compromising spread width or distribution accuracy. It works by forcing incoming air over the curtain to create a wake of low pressure stalled air behind. The applied product fills the wake and is forced to the ground by high pressure air flowing over the curtain. Where there’s a lot of spreading to be done hydraulic folding curtains can significantly increase productivity.

Border Control allows the adjustment of spinner speed from inside the cab at the
touch of a button on the ISOBUS display to reduce spinner speed independently
whilst boundary spreading to minimize wastage or overthrow.

The painted grade 304 stainless steel provides complete rust protection. Minimizing maintenance and corrosion, the paint will increase the life and residual value of the spreader.